Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

About CAR

Hi all,

what's the difference about following configuration?

and in configuration 2 , can it limit the total input bandwidth to 10M?

1. access-list 100 permit tcp any any eq http

interface f0

rate-limit input 10000000 1875000 1875000 conform-action continue exceed-action drop

rate-limit iput access-group 100 1000000 187500 187500 conform-action set-prec-transmit 4 exceed-action transmit

2. access-list 100 permit tcp any any eq http

interface f0

rate-limit iput access-group 100 1000000 187500 187500 conform-action set-prec-transmit 4 exceed-action transmit

rate-limit input 10000000 1875000 1875000 conform-action continue exceed-action drop

BRs

biao

3 REPLIES
Bronze

Re: About CAR

The following URL explains the commands for configuring CAR and what total bandwidth it can limit.

http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/qos_c/qcprt1/qcdcar.htm

New Member

Re: About CAR

Hi,

1.In the first configuration

If Total bandwidth goes above 10Mb and less than 11.8Mb, next rate-limit statement will be executed.If goes above 11.8Mb will get drop.

2.In the second configuration

All inbound HTTP traffic will not have a rate-limit.

All other traffic works same as the first configiuration.

3.If you want to limit the total B.W. to 10Mb

just enter as bellow.

interface f0

rate-limit input 10000000 1875000 1875000 conform-action transmit exceed-action drop

Regards

New Member

Re: About CAR

Hi Preddyi,

Maybe you are right, but i am not sure.

BRs

biao

97
Views
0
Helpful
3
Replies