Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

about the configuration of PPPoA for Radius authentication

HI,All

Could you help me confirm the problem? if a cisco7206 regarded as PPPoA terminator and send customers's information to related radius

server. Whether a session will first login in cisco7206, if there is no related authentication ability in cisco7206, the session then is sent to radius server to obtaining authorization. Related configuration is following:

aaa new-model

aaa group server radius ppp-o-a

server x.x.x.x auth-port 1645 acct-port 1646

!

aaa authentication login default local-case

aaa authentication ppp default group ppp-o-a

aaa authorization network default group ppp-o-a

aaa accounting network default start-stop group ppp-o-a

radius-server host x.x.x.x auth-port 1645 acct-port 1646

radius-server retransmit 3

radius-server key xxxxxxxxx

wait for response.:) thanks

1 REPLY
Cisco Employee

Re: about the configuration of PPPoA for Radius authentication

As per aaa config, the PPP users will be sent to radius server defined in group ppp-o-a for authentication and authorization and accounting..There is no local authentication or authorization is cunfigured for PPP users..If you don't want that, Pl. clarify more about what exactly you want ..

162
Views
0
Helpful
1
Replies