Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

about vlans

ok, i created 3 vlans in my 2950,three port for each vlan switch, but each vlan needs an exit to the internet, if my adsl modem in connected to vlan1 the default, and the others vlans can't see one each other , how tehy reach vlan1 to the internet .

1 REPLY
Purple

Re: about vlans

Hi,

You will need to enable inter-vlan routing on the ADSL modem so that these other VLANs can get out to the internet.

What sort of ADSL router are you using ?

You will need something like this if it's a Cisco router:

interface FastEthernt0.100

encapsulation dot1q 100

ip address 10.1.1.1 255.255.255.0

!

interface FastEthernt0.200

encapsulation dot1q 200

ip address 10.2.1.1 255.255.255.0

Pls do remember to rate posts.

Paresh

87
Views
0
Helpful
1
Replies
CreatePlease login to create content