Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Access List - IP Division for BGP Load Sharing

Using a 7204 router, we have six T-1's of Internet, all with BGP

Looking for suggestions as to how to divide the the IP ranges between the six providers; using the access lists and route maps.

Thanks!

3 REPLIES

Re: Access List - IP Division for BGP Load Sharing

Since there has been no response to your post, it appears to be either too complex or too rare an issue for other forum members to assist you. If you don't get a suitable response to your post, you may wish to review our resources at the online Technical Assistance Center (http://www.cisco.com/tac) or speak with a TAC engineer. You can open a TAC case online at http://www.cisco.com/tac/caseopen

If anyone else in the forum has some advice, please reply to this thread.

Thank you for posting.

Community Member

Re: Access List - IP Division for BGP Load Sharing

It might help if you clear up the reasons for the division, like... what are you using the t1's for?, just internet access? (though 6 t1's for internet access seems a little excessive, so that can't be it!)? internet services? do you wish to send on 3 t1's and receive on the other 3?

Bronze

Re: Access List - IP Division for BGP Load Sharing

Please provide additional information regarding your request:

- What route(s) are the providers advertising to you? Do you have a choice?

- What IP addresses do you use to connect to the Internet? Did each of the providers provide you with a block of addresses?

148
Views
0
Helpful
3
Replies
CreatePlease to create content