Re: access-list permit/deny fail to log on 3548xl with 12.0(5)wc
It may be that there is a difference in the way that logging is configured on the 3548 and the 3550. Could you post any statement in the 3548 config that has to do with logging. It would also help if you would post the output of the first page or two of show log. (I am especially interested in the status messages at the beginning of the display.)
Also I am not clear where or how you are checking for these log messages. Are you doing show log in a console or telnet session, or looking into a syslog server, or what. Where and how you are looking might change what we need to check.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...