I need to restrict the access of a vlan so only certain IPs can access machines in that vlan but at the same time I want this vlan to talk to the whole world.I have used the following access-list scenario and it works in a sense that only IPs specified in the access-list are able to talk to this vlan but at the same time machines in this this vlan don't talk to anything else even what is specified int he access-list (my traceroute and ping fails)
access-list 132 permit tcp any any established
access-list 132 permit ip 10.1.21.0 0.0.0.255 10.12.244.0 0.0.1.255
access-list 132 permit ip 10.1.22.0 0.0.0.255 10.12.244.0 0.0.1.255
access-list 132 permit ip 10.0.0.0 0.0.255.255 10.12.244.0 0.0.1.255
access-list 132 permit ip 10.5.80.0 0.0.7.255 10.12.244.0 0.0.1.255
access-list 132 permit icmp any 10.12.244.0 0.0.1.255 echo-reply
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...