access list

[maldives]

i want to add the following two lines to my access list 1, can u tell me the commands

access-list 1 permit 10.4.1.0 0.0.0.255

access-list 1 permit 10.10.0.0 0.0.255.255

[Georg Pauwen]

Hello,

not 100% sure what your question is, but cut & paste the existing access list 1 to a text editor (e.g. Wordpad), and add the two lines you have posted.

Remove the existing access list from the interface with the ´no ip access-group 1 in/out´ command, then remove the access list in global configuration mode from the router with the ´no access-list 1´ command. Then, in global configuration mode, paste the modified access list into the router config and apply it to the interface, in interface configuration mode with the ´ip access-group 1 in/out´ command.

HTH,

Georg

[maldives]

standard ip access-list 1

permit 10.4.1.0, wildcard bits 0.0.0.255

permit 10.13.1.0, wildcard bits 0.0.255.255

i want to add that list

thanks