If users are browsing the internet from your internal network, you don't need to allow any special ports inbound. Since you are hosting a web server, you need an access-list entry that reads like this:
access-list 101 permit tcp any interface outside eq 80
That is the access-list. You don't need an outbound access-list, unless you want to block certain traffic from leaving your network. Place that inbound access-list allowing port 80 on the outside interface of your PIX. I believe there's an implied deny ip any any at the end of every access-list. However, you could add in a deny ip any any to the end. Just follow that same syntax for any other ports you may want to allow through. I am assuming that your PC is behind the PIX. The PIX shouldn't block connections that are established by your PC to the internet.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.