We have multiple interfaces (server side) in the ace and we would require one serverfarm to talk to to another server farm over the vip. Now unfortunately we have a few servers in the serverfarm on the same subnet and hence we required natting. since we added a new vlan interface i just want to know that can we apply two nat dynamic commands on the policy map for each vlan? will that nat all the traffic coming from both the vlans?
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...