ACE rserver hosting website and healthcheck on seperate ports
Trying to find a solution to configuration issue ahead of me. First I have requests coming into the VIP over port 443 which websites on the rservers are hosted on port 81. In addition to that many websites are using that same port 81 on that rserver. Then, the healthcheck probe is an html page on port 80. How can I get this to work?
[toc:faq]The ProblemOn traditional switches whenever we have a trunk
interface we use the VLAN tag to demultiplex the VLANs. The switch needs
to determine which MAC Address table to look in for a forwarding
decision. To do this we require the switch to do...
[toc:faq]Introduction:Netdr is a tool available on a RSP720, Sup720 or
Sup32 that allows one to capture packets on the RP or SP inband. The
netdr command can be used to capture both Tx and Rx packets in the
software switching path. This is not a substitut...
IntroductionOSPF, being a link-state protocol, allows for every router
in the network to know of every link and OSPF speaker in the entire
network. From this picture each router independently runs the Shortest
Path First (SPF) algorithm to determine the b...