07-25-2006 05:58 AM - edited 03-03-2019 04:13 AM
Hi All,
I wanted to implement a Security ACL on VLAN for 4507R (IOS 12.24 EWA) i.e. I want to regulate the traffic to and from from the VLANs.
However when I implemented the normal Extended ACL I was surprized to find that it was not acting as it should on a Routed Port or L-2 Port.
However when cross checked in the config guide, I guess that its a VLAN MAP that needs to be used rather than a normal ACL to filter traffic to and fro on a VLAN in 4507R.
Am I correct over here or am I missing something out there?
Any help would be appreciable.
Kind Regards,
Wilson Samuel
07-25-2006 06:03 AM
Vlan map is dierectionless, it will deny or permit (whatever the case maybe) the packets as long as it matches the access-liss list associated with the vlan maps.
Please rate helpful posts.
07-25-2006 06:15 AM
Hi Bosalaza,
My query is:-
1. Is VLAN Map the only answer to filter traffic in 4507s??
2. Wont the traditional ACL implementation work in 4507s??
Regards,
Wilson SAmuel
07-25-2006 08:46 AM
1. Is VLAN Map the only answer to filter traffic in 4507s??
>> no, see below
2. Wont the traditional ACL implementation work in 4507s??
>> yes, it should work.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide