Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Added Vlan Port Slow

I needed to expand our Server Vlan on our 6509 switch. I expanded the Vlan and needed to move a server from within the Vlan but to the new expanded port. I moved the server from 7/48 to 6/48 (the new expanded Vlan port). The problem is when I moved the server from 7/48 to 6/48 the server was extremly slow and when I moved it back to 7/48 the server was back up to speed. Any ideas why?

4 REPLIES
Bronze

Re: Added Vlan Port Slow

is the speed and duplex setting on 7/48 and 6/48 the same ?

Re: Added Vlan Port Slow

Did you check the speed and duplex on the new port 6/48, to make sure it is set correctly.

Mike

New Member

Re: Added Vlan Port Slow

Yes, I did check the speed and duplex on both ports and they are set the same.

New Member

Re: Added Vlan Port Slow

what are the port counters showing?

Any other config differences between the two ports?

Did the mac address age out?

what sup? Could there be congestion on 6's backplane access?

91
Views
0
Helpful
4
Replies
CreatePlease to create content