Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Adding remote sites.

Hi, how do you add remote sides within RME / Campus.

We have a few (22) remote sites that we are trying to add into RME. The problem is that we do not have control of the routers on the wan. Currently we adding one of the remote side switches as one of the seed devices. The problem is that you can only add 5 seed devices.

1 ACCEPTED SOLUTION

Accepted Solutions
Blue

Re: Adding remote sites.

There is no restriction on adding seed devices in Campus. Server Configuration->Setup->ANI Server Admin->Discovery Settings. Under the Seed Devices window, select a rown and do a Right mouse click which will bring up a menu with Add/Delete options. Select Add to add more seed devies > 5. As for the remote sites, as long as Campus as both CDP/ILMI and SNMP reachability to those devices, it will discover them.

1 REPLY
Blue

Re: Adding remote sites.

There is no restriction on adding seed devices in Campus. Server Configuration->Setup->ANI Server Admin->Discovery Settings. Under the Seed Devices window, select a rown and do a Right mouse click which will bring up a menu with Add/Delete options. Select Add to add more seed devies > 5. As for the remote sites, as long as Campus as both CDP/ILMI and SNMP reachability to those devices, it will discover them.

73
Views
0
Helpful
1
Replies
CreatePlease login to create content