Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Adding seed devices for discovery

I have to discover one site at a time for about 20 remote sites, can someone let me know if this is the correct way to implement ... Thanks in advance.

1) to configure my seed devices (site1) in Discovery Settings and submit a discovery.

----> this will discover user information in UT

2) to add more seed devices (site2) in Discovery Settings and submit a discovery.

2.1 go to UT > Action > Discover ALL

-----> this will discover both seed devices from site1 and site2

3) repeat step 2) for new seed devices (site3) added to discover

-----> this will discover seed devices from site1, site2 and site3

6 REPLIES
Blue

Re: Adding seed devices for discovery

Should work ok.

New Member

Re: Adding seed devices for discovery

Thanks.

Where can I find the logical file of Discovery Settings ?

I have about 300 seed devices if I can locate the physical file of Discovery Settings, I can do my cut & paste.

Blue

Re: Adding seed devices for discovery

anisnmp.conf under /CSCOpx/etc/cwsi

New Member

Re: Adding seed devices for discovery

anisnmp.conf contains the community strings for the network devices.

I meant the file that keeps the seed device names. Thanks.

Blue

Re: Adding seed devices for discovery

Oh ok, then that is the Discovery.seed field in the ANIServer.properties file at the same location.

New Member

Re: Adding seed devices for discovery

So if you have 100 sites, you have to add 100 devices to the seed's list?

309
Views
3
Helpful
6
Replies
CreatePlease login to create content