06-18-2003 07:43 AM - edited 03-02-2019 08:14 AM
Can the dialer0 interface in the configuration below get a dynamically assigned address ? Is there a special interface config statement for this.
Radius server is all setup to allocate addresses from a pool and works to other vendors' routers.
interface ATM0
no shutdown
no ip address
no ip directed-broadcast
no ip mroute-cache
no atm ilmi-keepalive
pvc 0/38
encapsulation aal5mux ppp dialer
dialer pool-member 1
!
hold-queue 224 in
interface Dialer0
no cdp enable
no ip directed-broadcast
encapsulation ppp
dialer pool 1
dialer-group 1
ppp authentication chap callin
ppp chap hostname bishopsbr
ppp chap password brrd
Many thanks,
Mark
06-18-2003 04:41 PM
Found
ppp ipcp accept-address
in the documentation..will test to see if this works configured on the dialer0 interface.
If anyone has any feedback on this would be appreciated.
Thanks,
Mark
06-19-2003 03:18 AM
ip address negotiated
hth
Herbert
06-19-2003 03:41 AM
Thanks Herbert... sounds familiar now you mention it !!
Regards,
Mark
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: