06-18-2003 07:43 AM - edited 03-02-2019 08:14 AM
Can the dialer0 interface in the configuration below get a dynamically assigned address ? Is there a special interface config statement for this.
Radius server is all setup to allocate addresses from a pool and works to other vendors' routers.
interface ATM0
no shutdown
no ip address
no ip directed-broadcast
no ip mroute-cache
no atm ilmi-keepalive
pvc 0/38
encapsulation aal5mux ppp dialer
dialer pool-member 1
!
hold-queue 224 in
interface Dialer0
no cdp enable
no ip directed-broadcast
encapsulation ppp
dialer pool 1
dialer-group 1
ppp authentication chap callin
ppp chap hostname bishopsbr
ppp chap password brrd
Many thanks,
Mark
06-18-2003 04:41 PM
Found
ppp ipcp accept-address
in the documentation..will test to see if this works configured on the dialer0 interface.
If anyone has any feedback on this would be appreciated.
Thanks,
Mark
06-19-2003 03:18 AM
ip address negotiated
hth
Herbert
06-19-2003 03:41 AM
Thanks Herbert... sounds familiar now you mention it !!
Regards,
Mark
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide