It looks like this message may be occuring with the ROM or bootstrap software. Are you trying to netboot this device? You may want to break into the 827 (with the break key), change the config register to boot the system from flash (2102), and see if that makes a difference.
I m trying this by connecting console cable I was also trying to break into 827 with break key but nothing happen it got stuck there only with previous error message . Can u give me some more suggestion.
I'm not sure if there is a problem with your terminal emulation program sending a break, or the router is very broken. You may want to try another cisco device, to see if the break key works for it. If it does, then the 827 should likely be replaced.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.