Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

After Upgrade from CatOS to IOS 12.1(8b)E15

Ater Upgrade, The startup is logging this menssagge:

%SYS-6-READ_BOOTFILE_FAIL: bootflash:c6msfc-is-mz.121-1.E File boot failed -- File not accessible.

Attempt to download 'slot0:c6sup11-dsv-mz.121-8b.E15' ... okay

Starting download of 'slot0:c6sup11-dsv-mz.121-8b.E15': 8082390 bytes!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

I have ereased from slot0: the old version "c6msfc-is-mz.121-1.E.

QUESTION: Why Is The c6509 looking for the old version?

Otherwise, the command "remote command switch show bootvar" show follow:

C6509-MEM-sp#

BOOT variable = slot0:c6sup11-dsv-mz.121-8b.E15,1;bootflash:c6sup11-dsv-mz.121-8b.E15,12

CONFIG_FILE variable =

BOOTLDR variable does not exist

Configuration register is 0x2102

Secondary is up.

Secondary BOOT variable = slot0:c6sup11-dsv-mz.121-8b.E15,1;bootflash:c6sup11-dsv-mz.121-8b.E15,12

Secondary CONFIG_FILE variable =

Secondary BOOTLDR variable does not exist

Secondary Configuration register is 0x2102

QUESTION: Why Does the BootVariable have two devices (slot0: and bootflash)?

Thanks for your response.

Sergio

1 REPLY
Bronze

Re: After Upgrade from CatOS to IOS 12.1(8b)E15

114
Views
0
Helpful
1
Replies
CreatePlease to create content