What you need to do first is to find out the heat dissiption (The number of BTUs per hour that they give off) of each unit. This is usually found in the technical specs of each unit. Take a look at this page...
look at the table about 1/5 of the way down. Once yoiu have the BTU of every piece of eqiupment you can then contact an AC company with the total load plus at least a 10% overhead and they can pint you in the right direction on how mcuh cooling power you will need.
please remember to rate the post if it has helped you out.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.