Altiris Management software very slow with cat 4000 ansd gig up-links
I have a problem with a Network with 4006 layer 2 switches connected via GIG ports to a 6509 layer 3 switch with MSM not a msfc. The application runs very slow over the 4006's if I take a HUB and plug in the devices into the hub traffic runs very fast. If I plug the hub into the 4006 traffic slows to a crawl again. I have found not config problems and seems to only be with this application.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...