I get an error cannot connect to ANI server when going to Campus manager-topology services. I check the status of the ANI server is up. Restarted ANI services and Also rebooted ciscoworks machine. Still same error. Also how do you restart campus manager. THanks
What platform are you running server on? What version of LMS? What error do you get? Are you trying to connect with a local browser or with a remote client browser? Are you running dns correctly? If you don't have dns configured, add a host entry on the server (etc/hosts or winnt/system32/etc/hosts depending on platform) for itself and any remote clients, and add a host entry on all remote client machines for the server. Then login to Ciscoworks using the machine_name:1741 or ipaddress:1741. Never use the loopback address 127.0.0.1:1741 or localhost:1741 for local login.
We are running it on windows nt server. I'm not sure about the LMS version but the ANI version is 3.1. I was trynig to connect via a remote client and using the machine_name:1741. The errors that we get are :
I click on topology services
it will say "loading topology services"
then it will say "Connecting to ANI server:
then it will say "cannot connect to ANI server possible cause server not found"
then it will say "recommended action verify server is running and restart campus manager".
Everything else seem to be working except the campus manager and the programs in it.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...