I am trying to get Campus Manager up and running but whenever I go to run Topology Services it craps out saing that the ANI Server is not running. I look under my servcies for Windows 2000 and see there is no ANI server option there. I go to add a new seed device to teh Server administration and get the same error. WHat do I need to do reinstall is there a way to get this going.
go to server config > admin > process management > start process and go throughthe drop down menu and select aniserver. If you dont see the aniserver there then go to Stop process > stop the ani server and then restart it.
Yeah when I go to diagnosis ANI server it craps out also giving errors. I have also recevied apache errors when I go to toplogy section of campus manager. CiscoWorks is just not working out. I have have done multilpe installation and it still is not working properly.
This worked, but sometimes the connection problem with the ANI server still occurs. When opening the Topology Services I receive an error that the ANI server is not working. After a few seconds I try again and the ANI server is working and the Toplogy Services shows up. What is causing this?
I already applied the latest Campus IDU. CiscoWorks runs on a WIN2K server.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...