In general the route map is applied on the interface where the traffic to be policy routed enters the device doing PBR. So we would need some additional information about how you have configured PBR to be able to really answer your question correctly. If you want to route traffic sourced from 10.10.10 then it would probably make sense to apply a PBR route map to the interface where 10.10.10 is connected. If you also want to PBR 10.10.20 then we would need to know where 10.10.20 is connected and how the route map was configured.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.