Are changes needed

bullfoot · ‎10-08-2002

We are downgrading our frame from 512 to 256. Do I need to change anything on our 2610 router?

giedriusa · ‎10-08-2002

Hi

If You are not using traffic shaping, custom queueing or any other bandwith management where Your actual CIR is used, and You will be using the same DLCI, and Your interface is DTE (getting clock from Telco), You need no changes

HTH

Giedrius #10257

bullfoot · ‎10-08-2002

The lines in question are

fair-queue 64 256 0

service-module t1 timeslots 1-8

I'm pretty sure I need to change the fair-queue to 256, are there any other changes?

giedriusa · ‎10-08-2002

Hi,

leave fair queue as it is - it look like default settings.

What kind of connection you are getting - is it a fractional T1/E1 connection or leased line? in case of E1/T1 You will need to adjust timeslots number.

HTH

Giedrius #10257

thisisshanky · ‎10-08-2002

timeslots for 512 is 1-8

so for 256 you need to reduce it to 1-4.

Sankar Nair
UC Solutions Architect
Pacific Northwest | CDW
CCIE Collaboration #17135 Emeritus

bullfoot · ‎10-08-2002

Thanks for the help, the circuit is up and working fine.