Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Are changes needed

We are downgrading our frame from 512 to 256. Do I need to change anything on our 2610 router?

5 REPLIES
New Member

Re: Are changes needed

Hi

If You are not using traffic shaping, custom queueing or any other bandwith management where Your actual CIR is used, and You will be using the same DLCI, and Your interface is DTE (getting clock from Telco), You need no changes

HTH

Giedrius #10257

New Member

Re: Are changes needed

The lines in question are

fair-queue 64 256 0

service-module t1 timeslots 1-8

I'm pretty sure I need to change the fair-queue to 256, are there any other changes?

New Member

Re: Are changes needed

Hi,

leave fair queue as it is - it look like default settings.

What kind of connection you are getting - is it a fractional T1/E1 connection or leased line? in case of E1/T1 You will need to adjust timeslots number.

HTH

Giedrius #10257

Re: Are changes needed

timeslots for 512 is 1-8

so for 256 you need to reduce it to 1-4.

New Member

Re: Are changes needed

Thanks for the help, the circuit is up and working fine.

83
Views
0
Helpful
5
Replies
CreatePlease to create content