Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

ARP Table

I notice my 2950's and 2940's have an ARP table where I can enter in static ARP entries. If I enter all the ARP entries for my servers and networking devices, will this reduce some of the broadcast ARP traffic on my network?

2 REPLIES
VIP Purple

Re: ARP Table

Hello,

usually static ARP entries are used for hosts that do not respond to ARP request. Because most hosts support dynamic resolution, you usually do not need to specify static or permanent ARP cache entries. When a device does not respond to ARP requests, you can configure an ARP entry to be statically or permanently entered into the ARP cache so that those devices can still be reached.

Adding those entries will definitely reduce broadcast ARP traffic as well.

Regards,

GP

New Member

Re: ARP Table

This will only matter if the switch is locally generating the traffic. Doing this will not reduce the amount of ARP/broadcast traffic if it is sourced from devices on the network themselves.

248
Views
5
Helpful
2
Replies