Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

AS 5300 E1 Ohm Setings

Hi,

I have a AS 5300 with OCTAL E1 Card, the default set is 120 Ohm Balanced, but my PBX is 75ohm unbalanced, how i can do configure in the register for 75ohm unblanced?

thanks

1 ACCEPTED SOLUTION

Accepted Solutions
Bronze

Re: AS 5300 E1 Ohm Setings

Here is a link with the commands to change from the default of 120 Ohm balanced to 75 ohm unbalanced:

http://www.cisco.com/univercd/cc/td/doc/product/access/acs_serv/5300/hw_inst/mod_inst/53metv2.htm#8752

1 REPLY
Bronze

Re: AS 5300 E1 Ohm Setings

Here is a link with the commands to change from the default of 120 Ohm balanced to 75 ohm unbalanced:

http://www.cisco.com/univercd/cc/td/doc/product/access/acs_serv/5300/hw_inst/mod_inst/53metv2.htm#8752

83
Views
0
Helpful
1
Replies
CreatePlease to create content