Re: as5200 flash wont erase - (READ ONLY)

aa.raaz · ‎06-26-2002

hi all,

I want to erase flash: on as5200 and it has gone into read only mode.

kindly help and also getting this following error at boot up (thats the main reason i want to erase flash and copy new image on it). thanks in advance

this is the error:

AS5200 platform with 16384 Kbytes of main memory

program load complete, entry point: 0x3000060, size: 0x2f646c

*** BUS ERROR ***

Bus error at (return) pc 0x03084dc4, faulted addr 0x0213a100, scr1 0x0110

monitor: command "boot" aborted due to exception

System Bootstrap, Version 11.2(10)P, RELEASE SOFTWARE (fc1)

AS5200 platform with 16384 Kbytes of main memory

END OF ERROR

svanderr · ‎06-27-2002

Hi,

The bus error means the box crashed.

The address points to the DRAM.

I would suggest to first reseat the DRAM. If this doesn't help, replace it.

More info can be found at : http://www.cisco.com/warp/public/122/crashes_buserror_troubleshooting.shtml

Cheers,

Stef