Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

AS5200 router resets unexpectedly.

Our Cisco AS5200 has been resetting at irregular intervals with the folowing error. I have replaced the flash memory with some extras I had kicking around. I have also replaced the memory with memory from another router.

Any insight would be appreciated.

Here are the vitals .....

System restarted by bus error at PC 0x220ECB84, address 0x213A7E2 at 15:34:47 EDT Tue May 20 2003

System image file is "flash:c5200-is-l.113-9.T.bin", booted via flash

Cisco Internetwork Operating System Software

IOS (tm) 5200 Software (C5200-IS-L), Version 11.3(9)T, RELEASE SOFTWARE (fc1)

Copyright (c) 1986-1999 by cisco Systems, Inc.

Compiled Wed 07-Apr-99 23:14 by pwade

Image text-base: 0x22033EA0, data-base: 0x00005000

ROM: System Bootstrap, Version 11.1(474A) [jdisimon 104], INTERIM SOFTWARE

BOOTFLASH: 5200 Software (C5200-BOOT-L), Version 11.3(9)T, RELEASE SOFTWARE (fc1)

tor-as1 uptime is 48 minutes

System restarted by bus error at PC 0x220ECB84, address 0x213A7E2 at 15:34:47 EDT Tue May 20 2003

System image file is "flash:c5200-is-l.113-9.T.bin", booted via flash

cisco AS5200 (68030) processor (revision C) with 16384K/4096K bytes of memory.

Processor board ID 04428061

Bridging software.

X.25 software, Version 3.0.0.

SuperLAT software copyright 1990 by Meridian Technology Corp).

Primary Rate ISDN software, Version 1.1.

Mother board with terminator card.

1 Ethernet/IEEE 802.3 interface(s)

50 Serial network interface(s)

48 terminal line(s)

2 Channelized T1/PRI port(s)

128K bytes of non-volatile configuration memory.

8192K bytes of processor board System flash (Read ONLY)

8192K bytes of processor board Boot flash (Read/Write)

Configuration register is 0x2102

Region Manager:

Start End Size(b) Class Media Name

0x00000000 0x00FFFFFF 16777216 Local R/W main

0x00005000 0x0001ACC7 89288 IData R/W main:data

0x0001ACC8 0x00092D1B 491604 IBss R/W main:bss

0x00092D1C 0x00FFFFFF 16175844 Local R/W main:heap

0x03000000 0x037FFFFF 8388608 Flash R/O bootflash

0x20000000 0x203FFFFF 4194304 Iomem R/W iomem

0x22000000 0x227FFFFF 8388608 Flash R/O flash

0x22033EA0 0x226831CB 6615852 IText R/O flash:text

3 REPLIES
Cisco Employee

Re: AS5200 router resets unexpectedly.

You need to issue command "sh stack" and plug that output at the url below

https://www.cisco.com/cgi-bin/Support/OutputInterpreter/home.pl

Select "show stack".

That stack decoder will decode it and give you possible matching bug.

11.3(9)T id bit old so try to updrade to 12.0 atleast.

New Member

Re: AS5200 router resets unexpectedly.

The router "completely" failed this morning, so it looks like it was hardware. :-(

Thanks for your input in any case.

DT

New Member

Re: AS5200 router resets unexpectedly.

From the output given by you , it is clear that the router is trying access an address which is in the invalid range of address. Please see the address from the line

System restarted by bus error at PC 0x220ECB84, address 0x213A7E2.

The address 0x213A7E2 doesnt fall between any of the ranges from the output

Region Manager.( given in your problem statement)

This indicates router is trying to access an outside range of address from the memory. This is a IOS software issue.

Get the "show stacks" command output and use the "Out put interpreter tool" . This is accessible to registered user. If you have CCO login, you can use this

-Deepu

92
Views
0
Helpful
3
Replies