AS5300 ---> console connection but will not ask for a login
I am connected to a as5300 through the console port and when I hit return to enter the system it tells me to hit return to continue. I hit return and it tells me again to hit return. I captured the following:
%SYS-4-CONFIG_NEWER: Configuration from version 12.1 may not be correctly unders
%SYS-6-BOOT_MESSAGES: Messages above this line are from the boot loader.
This document gives several answers on frequently asked questions for PFRv3 channel state behavior.
Q1: What are all the channel operational states from a BR (border role) perspective and what are the rules/conditions to be in each st...
The need was to reach an host inside a LAN through a VPN connection managed by the LAN gateway (Cisco 1921).
The LAN gateway performs NAT and there was a dedicate nat rule for the host i wanted to reach through VPN.
I couldn't connect to the hos...
We have 3 identical switches configured by someone else and would like to claim some of the Gigabit ports(G1/G2/G3/G4) for use on servers. When we try to change the wiring and configuration, we run in to connectivity issues. Attached is a des...