cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
343
Views
0
Helpful
2
Replies

AS5300 IOS versions

pakkanen
Level 1
Level 1

What is the latest or recommended ISO version for AS5300?

We are running 12.2(2)XB6 and MICA 2.9.4.0 (w/o V.92), and have problems with memory leaking, and minor modem disconnect problems.

qnet-as5300-hki1#sh ver

Cisco Internetwork Operating System Software

IOS (tm) 5300 Software (C5300-JS-M), Version 12.2(2)XB6, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)

TAC Support: http://www.cisco.com/tac

Copyright (c) 1986-2002 by cisco Systems, Inc.

Compiled Mon 17-Jun-02 21:29 by hwcheng

Image text-base: 0x600089B0, data-base: 0x6147C000

ROM: System Bootstrap, Version 12.0(2)XD1, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)

BOOTLDR: 5300 Software (C5300-BOOT-M), Version 12.0(4)T1, RELEASE SOFTWARE (fc1)

qnet-as5300-hki1 uptime is 2 weeks, 3 days, 22 hours, 16 minutes

System returned to ROM by reload at 03:11:00 EET Sat Jan 1 2000

System image file is "flash:c5300-js-mz.122-2.XB6.bin"

cisco AS5300 (R4K) processor (revision A.32) with 65536K/16384K bytes of memory.

Processor board ID 15970547

R4700 CPU at 150Mhz, Implementation 33, Rev 1.0, 512KB L2 Cache

Channelized E1, Version 1.0.

Bridging software.

X.25 software, Version 3.0.0.

SuperLAT software (copyright 1990 by Meridian Technology Corp).

TN3270 Emulation software.

Primary Rate ISDN software, Version 1.1.

Backplane revision 2

Manufacture Cookie Info:

EEPROM Type 0x0001, EEPROM Version 0x01, Board ID 0x30,

Board Hardware Version 3.1, Item Number 800-2544-03,

Board Revision D0, Serial Number 15970547,

PLD/ISP Version 0.0, Manufacture Date 29-Oct-1999.

1 Ethernet/IEEE 802.3 interface(s)

1 FastEthernet/IEEE 802.3 interface(s)

128 Serial network interface(s)

120 terminal line(s)

8 Channelized E1/PRI port(s)

128K bytes of non-volatile configuration memory.

16384K bytes of processor board System flash (Read/Write)

8192K bytes of processor board Boot flash (Read/Write)

2 Replies 2

mljohnson
Level 4
Level 4

If you don't need V.92, then the best bet is to run 12.1(12) with 2.7.3.0 modem code. Otherwise, 12.2(2)XB7 with 2.9.4.0 modem code would be the recommendation.

Ok thanks. Is the modem code more stable in 2.7.3.0 than in 2.9.4.0?

What about 12.2(12), or did you mean that instead of 12.1...