Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

AS5300 MICA upgrade

Tried to upgrade the AS5300 MICA modem code to 2.9.4.0 following the Cisco upgrade manual (copy tftp flash, copy flash modem, etc) but failed.. sh mo map shoved some of the modems running the new versions others (active modems) not. After reload we are back to old version (see below). So how can I make the change permanent?

qnet-as5300-hki1#sh mo map

Slot 1 has Mica Carrier card.

Modem Firmware Firmware

Module Numbers Rev Filename

0 1/0 - 1/11 2.9.2.0 IOS-Default

1 1/12 - 1/23 2.9.2.0 IOS-Default

2 1/24 - 1/35 2.9.2.0 IOS-Default

3 1/36 - 1/47 2.9.2.0 IOS-Default

4 1/48 - 1/59 2.9.2.0 IOS-Default

5 1/60 - 1/71 2.9.2.0 IOS-Default

6 1/72 - 1/83 2.9.2.0 IOS-Default

7 1/84 - 1/95 2.9.2.0 IOS-Default

8 1/96 - 1/107 2.9.2.0 IOS-Default

9 1/108 - 1/119 2.9.2.0 IOS-Default

Firmware-file Version Firmware-Type

============= ======= =============

system:/ucode/mica_board_firmware 3.0.2.0 Mica Boardware

system:/ucode/mica_port_firmware 2.9.2.0 Mica Portware

system:/ucode/microcom_firmware 5.2.30 Microcom F/W and DSP

flash:mica-modem-pw.2.9.4.0.bin 2.9.4.0 Mica Portware

3 REPLIES
New Member

Re: AS5300 MICA upgrade

Hi,

try this

spe 1/0 2/9 -- numbers might be different on Your system

firmware location flash:mica-modem-pw.2.9.4.0.bin

HTH

RGDS

Giedrius #10257

New Member

Re: AS5300 MICA upgrade

Hi and thanks!

Yes I was trying that, but have some concern with the slot etc numbers. We have 10 x 12 MICA modems, and spe only accepts 1/0 up to 1/24 (example 2/0 is invalid). What exactly these numbers mean, why "24"?

New Member

Re: AS5300 MICA upgrade

Hi,

this will describe Your problem and steps you need to take:

http://www.cisco.com/en/US/products/sw/iosswrel/ps1830/products_feature_guide09186a0080087ae2.html

or, alternatively, searc www.cisco.com for spe

HTH

Giedrius #10257

182
Views
0
Helpful
3
Replies
CreatePlease login to create content