Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

AS5300 & MRTG - Only indicates half the amount of lines in use

We are running IOS 12.2.1(a) on our AS5300's and MRTG reflects the correct amount of lines/modems in use - as compared with the "Show..." command.

Recently we ran some tests on one of the AS's with IOS version 12.2.12, now our MRTG graphs only indicate (about) half the amount of lines/modems in use when compared to the "show...." command.

Initially we got worried and thought that the AS was not accepting calls due to the new IOS, but as it turns out it seems to be possibly SNMP related.

Anyone with a solution?

I am currently looking at MRTG as well to find a solution.

Thanks.

2 REPLIES
Bronze

Re: AS5300 & MRTG - Only indicates half the amount of lines in u

New Member

Re: AS5300 & MRTG - Only indicates half the amount of lines in u

The same happens on AS5400 as well. The latest SNMP "stable" IOS, for reporting the correct ammount of lines in use is 12.2.7. What happened since, and how is it possible that nobody noticed that it have to be fixed? If You have any other solution apart from downgrading to earlier IOS, I'd be happy to see it. :)

Best regards, Aleksandar.

118
Views
0
Helpful
2
Replies
CreatePlease to create content