Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

AS5300 Problem

I currently have an AS5300 Cisco router for my E1R2 dialup connections. My problem is, some of my dialup users have difficulty in establishing connection due to these errors:

Line User Host(s) Idle Location

2 tty 2 Virtual Exec 00:00:00

3 tty 3 Virtual Exec 00:00:00

4 tty 4 Virtual Exec 00:00:00

5 tty 5 Virtual Exec 00:00:00

6 tty 6 Virtual Exec 00:00:00

7 tty 7 user1 Async interface 00:00:00 PPP: xxx.yyy.zzz.aaa

8 tty 8 user2 Async interface 00:00:12 PPP: xxx.yyy.zzz.aab

9 tty 9 user3 Async interface 00:05:47 PPP: xxx.yyy.zzz.aba

10 tty 10 user4 Async interface 00:00:00 PPP: xxx.yyy.zzz.baa

As a result, some of my terminal ports are unavailbe due to Virtual Execs. What I wanted to know are:

1. what are the causes of the following problems ?

2. what are the solutions for these problems ?

3. how can i get rid of the following problems ?

I haven't encountered a problem such as this one before and what im doing is to reload or power off the router so that it will disappear.

Thanks.

2 REPLIES
Silver

Re: AS5300 Problem

This is a known issue...what IOS image are you running on the as5300?

CSCdp33819 "TTY lines process virtual-exec is running, no user dialed in" is Resolved in 12.1 later images.

Thanks, Mak.

Community Member

Re: AS5300 Problem

Sir,

Here is the IOS version of my RAS. This problem started last 3 months, my concern is, I have been using this RAS for the past 4 years and I haven't encountered a problem such as the one I'm having.

Are there any solutions for this problem aside from upgrading the IOS ? Where can I get an IOS, can you provide me with one :) ?

Cisco Internetwork Operating System Software

IOS (tm) 5300 Software (C5300-I-M), Version 12.0(7)T, RELEASE SOFTWARE (fc2)

Copyright (c) 1986-1999 by cisco Systems, Inc.

Compiled Wed 08-Dec-99 21:00 by phanguye

Image text-base: 0x600088F8, data-base: 0x607D4000

ROM: System Bootstrap, Version 12.0(2)XD1, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)

BOOTFLASH: 5300 Software (C5300-BOOT-M), Version 12.0(4)T1, RELEASE SOFTWARE (fc1)

ras1 uptime is 1 day, 6 hours, 38 minutes

System returned to ROM by reload at 17:52:36 PHILIPP Thu Jul 27 2000

System image file is "flash:c5300-i-mz.120-7.T.bin"

cisco AS5300 (R4K) processor (revision A.32) with 65536K/16384K bytes of memory.

Processor board ID 15266266

R4700 CPU at 150Mhz, Implementation 33, Rev 1.0, 512KB L2 Cache

Channelized E1, Version 1.0.

Bridging software.

X.25 software, Version 3.0.0.

Primary Rate ISDN software, Version 1.1.

Backplane revision 2

Manufacture Cookie Info:

EEPROM Type 0x0001, EEPROM Version 0x01, Board ID 0x30,

Board Hardware Version 2.0, Item Number 800-2544-3,

Board Revision B0, Serial Number 15266266,

PLD/ISP Version 0.0, Manufacture Date 8-Oct-1999.

1 Ethernet/IEEE 802.3 interface(s)

1 FastEthernet/IEEE 802.3 interface(s)

60 terminal line(s)

4 Channelized E1/PRI port(s)

128K bytes of non-volatile configuration memory.

8192K bytes of processor board System flash (Read/Write)

8192K bytes of processor board Boot flash (Read/Write)

Configuration register is 0x2102

Thanks,

Derrick

207
Views
0
Helpful
2
Replies
CreatePlease to create content