Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

AS5300 tacaas and safeword

I have an acces server with the next schema


The problem is that I Cannot make dial-up with callback by using safeword cards

if I Configure a Fixed password in the safeword server, the callback works without problems, but if I use the

token card it only validate the first call, the callback send me authentication error

I want to get the session authenticated by my server on wich I'm using token cards (safeword).

here is part of the configuration

aaa new-model

aaa authentication login default group tacacs+ local

aaa authentication ppp default if-needed group tacacs+ local

aaa authorization network default group tacacs+ local

aaa accounting update newinfo

aaa accounting exec default start-stop group tacacs+

aaa accounting network default start-stop group tacacs+

enable secret

interface Group-Async1

ip unnumbered Loopback0

ip nat inside

encapsulation ppp

dialer in-band

dialer idle-timeout 600

dialer-group 1

async default routing

async mode dedicated

peer default ip address pool default

no cdp enable

ppp callback accept

ppp authentication pap chap callin

group-range 1 60

tacacs-server host

tacacs-server timeout 20

tacacs-server key

line con 0

transport input none

line 1 60

exec-timeout 0 0

autoselect ppp

script callback callback

refuse-message ^CC [!NMM!] Modem no disponible ^C

modem InOut

modem autoconfigure type mica

transport preferred none

transport input all



Re: AS5300 tacaas and safeword

CreatePlease to create content