Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

AS5301s with RMON

okay this one is for those dial gurus out there.

I'm trying to figure out some rmon commands for the as5301s with IOS 12.1. what I want to do is to be able to monitor the success rate on the individual modem. When you do a show modem, you will notice the success rate on the device. i want to be able to generate a trap from the device to be sent to openview and onwards to our ticketing system. What command will I need to enter on the as5301s to generate a trap when a modem has a success rate below 80%?



Re: AS5301s with RMON

Since there has been no response to your post, it appears to be either too complex or too rare an issue for other forum members to assist you. If you don't get a suitable response to your post, you may wish to review our resources at the online Technical Assistance Center ( or speak with a TAC engineer. You can open a TAC case online at

If anyone else in the forum has some advice, please reply to this thread.

Thank you for posting.