AS5350 set up

[kevin.hu]

I tried to fine good documentations on how to setup AS5350 connecting to a pool of 6 modems (3com). Please help.

Also, these 6 modems are connecting to 6 phone lines. Instead of giving out 6 phone numbers, can phone company set up one phone number representing all 6 numbers?

If so, how do I roll over to the next available modem if the first line is busy?

Thanks,

[vmiller]

order an ISDN BRI or PRI, work with your telco to have one number attached to all the B channels.

are the 3coms remote ? The 5350 should have onboard modems

heres some doc to chew on:

http://www.cisco.com/en/US/customer/products/hw/univgate/ps501/products_configuration_guide_chapter09186a008007df2d.html

[tepatel]

I assume that you want to cofigure AS5350 to dialout to those 6 analog phones lines connected with analog modems.

Here is the link which talks about how to configure AS5350 for dialout using Digital modem calls.

http://www.cisco.com/warp/public/793/access_dial/5400out.html

Note that, you need to have a digital line like PRI connected to AS5350 for that.

Also phone company can have analog lines in the hunt group with one number for all so that calls on the same number will be forwarded to those lines which are in that hunt group.