AS5350 SNMP OIDs

[karunesh]

I have AS5350 with E1 PRI lines terminated.So actually I was looking for OIDs for E1/T1 interface for AS5350 so that I can build MRTG/RRDTool graphs for number of calls.

Can someone give me the link where I can get all OIDs for AS5350.

Thanks

[K2]

[rmushtaq]

ftp://ftp.cisco.com/pub/mibs/oid/ and

http://www.cisco.com/en/US/products/hw/univgate/ps501/products_implementation_design_guide_chapter09186a00800eaafd.html

[minie]

MRTG is usually used to monitor ifEntry in IF-MIB. Specifically, ifInOctets and ifOutOctets. Following link is you friend.

http://www.cisco.com/go/mibs

[j-galajda]

Hello!

Actually I don't have a link for you, but I can give you 2 OIDs, which we use to measure the number of calls in AS.

.1.3.6.1.4.1.9.9.47.1.3.1.1.6 gives you the state of the modems.

.1.3.6.1.4.1.9.10.19.1.1.4 gives you the number of DS0s that are currently in use.

I hope this helps you.

BR

[karunesh]

Thanks..I implemented that and it's working nice..apart from this can you give me some other OIDs which can give me some good info about my E1/T1 trunck.

[K2]