I am currently running 12.2.-12a IOS with IPX enabled. when i have a client dial in to the router running 95 or 98 they route IPX fine, if they have NT or W2K they can't get to a IPX server. IP seems to be working fine. We are using the nextport modems and doing IPX GRE tunneling. has anyone experienced this or have a theory. it is not the client on the workstation. the only change in the environment was to the router IOS, due to another bug.
Cisco's recommendation for a 5400 is either 12.2(7c) w/ 126.96.36.199, SPE v6.108, or if you want V.92 then it would be 12.2(2)XB8 w/ 188.8.131.52, SPE v7.16.
From your initial post it sounds like you upgraded; the old code works, the new code does not (specifically for W2K and NT users). That much information right there should be enough to justify the TAC submit a bug report, to get some development assistance.
loaded 12.2(2)xb8 with the spe 7.15 and i am still getting the same problem. we working on ipx with the 12.2(2)xb5 code. I have also tried 12.2(2)xb7, 12.2.-11T1, and 12.2-12a (this one i get GRE tunnel flapping) any thoughts?
I see no reason that the modem code would be relevant. It sounds like you are saying that 12.2(2)XB5 works and 12.2(2)XB7 does not; I don't see any bugs that integrated between those images that could explain the problem. It would seem that the TAC, given this info along with the good debug from 12.2(2)XB5 and the failed info from 12.2(2)XB7, can figure out what is causing the problem. You should ask to escalate the case if progress is not being made.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.