Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

AS5800 E1 configure

When configure as5800 fully load dial-shelf, cisco recommend 4 E1 trunk card, 8 MICA modem card, 2 DSC card. to support 1152 modem calls.

Can I put 4 E1 trunk card, 9 MICA modem card and 1 DSC card to support 1296 modem calls ?

  • Other Network Infrastructure Subjects
1 ACCEPTED SOLUTION

Accepted Solutions
Silver

Re: AS5800 E1 configure

No, the DSC slots (12& 13) cannot be used for the modem card.

The Cisco 5814 dial shelf contains 14 slots (numbered 0 to 13 on the backplane) and can support as many as 10 modem cards, 2 T3 or 4 T1 trunk cards, and 2 dial shelf controllers (DSCs). Slots 12 and 13 in the dial shelf are dedicated slots for the DSCs. Metal guard pins on the backplane module prevent you from installing any other type of card in these two slots.

Thanks, Mak.

1 REPLY
Silver

Re: AS5800 E1 configure

No, the DSC slots (12& 13) cannot be used for the modem card.

The Cisco 5814 dial shelf contains 14 slots (numbered 0 to 13 on the backplane) and can support as many as 10 modem cards, 2 T3 or 4 T1 trunk cards, and 2 dial shelf controllers (DSCs). Slots 12 and 13 in the dial shelf are dedicated slots for the DSCs. Metal guard pins on the backplane module prevent you from installing any other type of card in these two slots.

Thanks, Mak.

76
Views
0
Helpful
1
Replies