Hi, I am using a Cisco ASA 5520 connected to 3 network: outside (public_address/8), inside (192.168.140.251/24) and guest (10.1.0.1/8). Each of this interface has an associated access-list, with many rules, permitting traffic to the outside network from inside and guest, and to inside network with destination nat. Now, overlapped to the public_network on the outside interface, I also have another private network (10.20.0.0/8). The problem is that I can access to the guest network only with a public IP, but not an IP of the 10.20 network. How can I do that?
Re: ASA 5520 - enabling access from external network
Hi, thanks for your reply. However seems that my problem is that all packets coming from a private IP address from the outside network are dropped: seems there is an implicit rule that block incoming packets when they have a private IP address, a sort of 'anti-spoofing' rule. What I want to do is remove this rule. Is it possible, and how?
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.