Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

ASA5520 stuck on "Launching Bootloader"

NOTE:  Tried to post in "Security" community, got message that posting was disabled.

Attempting to boot ASA5520 from flash:

Booting system, please wait... 
 

CISCO SYSTEMS 
Embedded BIOS Version 1.0(10)0 03/25/05 22:42:05.25

Low Memory: 631 KB
High Memory: 2048 MB
PCI Device Table.
Bus Dev Func VendID DevID Class              Irq
 00  00  00   8086   2578  Host Bridge        
 00  01  00   8086   2579  PCI-to-PCI Bridge  
 00  03  00   8086   257B  PCI-to-PCI Bridge  
 00  1C  00   8086   25AE  PCI-to-PCI Bridge  
 00  1D  00   8086   25A9  Serial Bus         11
 00  1D  01   8086   25AA  Serial Bus         10
 00  1D  04   8086   25AB  System             
 00  1D  05   8086   25AC  IRQ Controller     
 00  1D  07   8086   25AD  Serial Bus         9
 00  1E  00   8086   244E  PCI-to-PCI Bridge  
 00  1F  00   8086   25A1  ISA Bridge         
 00  1F  02   8086   25A3  IDE Controller     11
 00  1F  03   8086   25A4  Serial Bus         5
 00  1F  05   8086   25A6  Audio              5
 02  01  00   8086   1075  Ethernet           11
 03  01  00   177D   0003  Encrypt/Decrypt    9
 03  02  00   8086   1079  Ethernet           9
 03  02  01   8086   1079  Ethernet           9
 03  03  00   8086   1079  Ethernet           9
 03  03  01   8086   1079  Ethernet           9
 04  02  00   8086   1209  Ethernet           11
 04  03  00   8086   1209  Ethernet           5

Evaluating BIOS Options ...
Launch BIOS Extension to setup ROMMON

Cisco Systems ROMMON Version (1.0(10)0) #0: Fri Mar 25 23:02:10 PST 2005

Platform ASA5520

Use BREAK or ESC to interrupt boot.
Use SPACE to begin boot immediately.
                                                
Launching BootLoader...

 

And there it will sit presumably forever.  Breaking in to rommon I can tftpdnld and run any image I want just fine.  Tried erasing flash and reloading image, no good.  Tried new flash, no good.  Tried disk1, no good.  Any ideas?

Everyone's tags (1)
5 REPLIES
Silver

  Hi, What code version are

 

 

Hi,

 

What code version are you trying to boot?

 

Thanks

John

New Member

v9.1(4)

v9.1(4)

Silver

HiI have had some issues with

Hi

I have had some issues with 9.1 not booting on an ASA 5505. 9.0 and 9.2 worked with out a problem. Try another version and see if problem goes away.

 

John

New Member

Will do, thanks for the

Will do, thanks for the suggestion...

New Member

This is odd - when I ask

This is odd - when I ask Cisco they tell me that 9.2 isn't supported on the 5520.

105
Views
0
Helpful
5
Replies