Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Astro messages on cat4006

Hi

I have a following error messages in the log buffer on Cat4006 ( supervisor WS-X4014 ).

The current running version is 121-12c.EW1.

I would like to know the signification about this astro message. It's an hardware or Software issue

Many thanks

Regards,

14w2d: %C4K_LINECARDMGMTPROTOCOL-4-INITIALTIMEOUTWARNING: Astro 4-1(Fa4/1-8) - management request timed out.

14w2d: %C4K_LINECARDMGMTPROTOCOL-4-INITIALTIMEOUTWARNING: Astro 2-1(Fa2/1-8) - management request timed out.

14w2d: %C4K_LINECARDMGMTPROTOCOL-4-INITIALTIMEOUTWARNING: Astro 4-5(Fa4/33-40) - management request timed out.

14w2d: %C4K_LINECARDMGMTPROTOCOL-4-INITIALTIMEOUTWARNING: Astro 2-2(Fa2/9-16) - management request timed out.

14w2d: %C4K_LINECARDMGMTPROTOCOL-4-INITIALTIMEOUTWARNING: Astro 5-6(Fa5/41-48) - management request timed out.

14w2d: %C4K_LINECARDMGMTPROTOCOL-4-INITIALTIMEOUTWARNING: Astro 4-5(Fa4/33-40) - management request timed out.

14w2d: %C4K_LINECARDMGMTPROTOCOL-4-INITIALTIMEOUTWARNING: Astro 2-5(Fa2/33-40) - management request timed out.

14w2d: %C4K_LINECARDMGMTPROTOCOL-4-INITIALTIMEOUTWARNING: Astro 4-6(Fa4/41-48) - management request timed out.

14w2d: %C4K_LINECARDMGMTPROTOCOL-4-INITIALTIMEOUTWARNING: Astro 5-3(Fa5/17-24) - management request timed out.

2 REPLIES
Cisco Employee

Re: Astro messages on cat4006

New Member

Re: Astro messages on cat4006

Answers to Astro messages are sometimes time consuming as it is difficult to find. Astro is a type of ASIC on the 4006.

Generally it could be intermittant component failure, network congestion that forces the CPU usage high (check that), cabling, sup clock failures, or you could even have a power issue.

Reference:

http://www.cisco.com/en/US/customer/products/hw/switches/ps663/products_tech_note09186a00801c9221.shtml

335
Views
0
Helpful
2
Replies
CreatePlease to create content