I need to dial-in from a 2621 (8 Async modem lines + 2 BRI Isdn) into a 3640 (same interfaces) bundling together all the available lines (Async + ISDN) in a single connection, there's a way to do that ?
Actually i can only do DDR with MPPP with a single type at a time (Async OR Isdn).
You should be able to put all the interfaces in a rotary-group, and if the load-threshold is being met we will simply continue to add links. Note that you should probably disable fragmentation, since the delay on the async lines will be more than the delay on the ISDN lines.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...