Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

ATA 186 upgrade

Someone please help to upgrade my ATA 186 from 2.15 to 2.16. I followed instructions for both executable and tftp but won't do it. Any trick ? Thanks a lot.

  • Other Network Infrastructure Subjects
3 REPLIES
VIP Purple

Re: ATA 186 upgrade

Hello,

where exactly in the process do you get stuck ? I guess you are following the procedure described here:

--> as described in the section 'Upgrading the Signalling Image'

http://www.cisco.com/univercd/cc/td/doc/product/voice/ata/ataadmn/sccp/sccpaapc.pdf

Regards,

GP

New Member

Re: ATA 186 upgrade

Dear Sir,

Thank you for your help but upgrading still fails. After waiting a few minutes, a voice recording tells me the upgrade has failed.

This program runs continuously; Press -c to abort.

Upgrade server ready...

Wed Dec 10 20:04:10 2003 192.168.2.2 -> < 192.168.1.109="" 8500="" 123="">

---------------------------------------------

Ping works fine:

D:\Technology\Cisco ATA 186>ping 192.168.2.2

Pinging 192.168.2.2 with 32 bytes of data:

Reply from 192.168.2.2: bytes=32 time=64ms TTL=250

Reply from 192.168.2.2: bytes=32 time=64ms TTL=250

Reply from 192.168.2.2: bytes=32 time=63ms TTL=250

Reply from 192.168.2.2: bytes=32 time=62ms TTL=250

Ping statistics for 192.168.2.2:

Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),

Approximate round trip times in milli-seconds:

Minimum = 62ms, Maximum = 64ms, Average = 63ms

D:\Technology\Cisco ATA 186>

New Member

Re: ATA 186 upgrade

Dear Sir,

I found the problem: somehow it was trying to contact my other NIC card instead of the network intf connecting to ATA. Thank you very much for your instructions.

Dvu

144
Views
0
Helpful
3
Replies