Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Ata flash card failure on 6509

6509 and native ios 12.1(8b) ,ata flash card can't work;

format slot0:

error message:

6509#format slot0

Format operation may take a while. Continue? [confirm]

Format operation will destroy all data in "slot0:". Continue? [confirm]

Enter volume ID (up to 64 chars)[default slot0]:

%Error formatting slot0 (Bad device info block)

4 REPLIES
New Member

Re: Ata flash card failure on 6509

If you have another 6509, check the same to see if the card has gone bad.

Bronze

Re: Ata flash card failure on 6509

Hi, if it is an ata flash card then it will be disk0:

What size is it?

New Member

Re: Ata flash card failure on 6509

ata flash card size is 64M

Bronze

Re: Ata flash card failure on 6509

Use the command format disk0: for any device over 32MB.

Also, the 64MB PCMCIA ATA Flash card requires Supervisor Engine 2 with ROMMON software release 7.1(1).

hth

292
Views
0
Helpful
4
Replies