03-09-2003 05:11 PM - edited 03-02-2019 05:43 AM
Hi all,
I am confused about the ilmi pvc in atm interface. I don't know when should I use it. I saw some config and it seems that when use arp server the ilmi pvc is not needed. can any body give me a hand? Thank You!
Best Regards
Teru Lei
Solved! Go to Solution.
03-09-2003 05:18 PM
Teru,
ILMI has many functions for ATM. In a LANE environment it's used for address registration with the LECS, other things use SNMP messages for PVC management. Here' s a link that defines a lot of ILMI uses. Hope this helps you.
http://www.cisco.com/en/US/partner/tech/tk39/tk48/technologies_tech_note09186a008009484f.shtml
Regards,
Don
03-09-2003 05:18 PM
Teru,
ILMI has many functions for ATM. In a LANE environment it's used for address registration with the LECS, other things use SNMP messages for PVC management. Here' s a link that defines a lot of ILMI uses. Hope this helps you.
http://www.cisco.com/en/US/partner/tech/tk39/tk48/technologies_tech_note09186a008009484f.shtml
Regards,
Don
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: