Has anyone ever setup a successful Cisco 7204XVR with a 4-port IMA Group on an ATM? We are running this scenario in 3 different remote offices and find that our whole IMA group drops at least twice a week, and at times as much as twice a day. We are running 12.2(1) IOS on our 7204s. Should we change our IOS version? I couldnt find any ATM-related bugs for that particular IOS version on the Bug Tracker. Any other suggestions to keep our ATM from dropping so much? thanks in advanced.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...