cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
362
Views
0
Helpful
2
Replies

ATM IMA using multiple point-to-point T1s

pmorehead
Level 1
Level 1

Can a pair of 2610 routers with T1 ATM IMA module be configured for point to point T1s (instead of ATM) to connect to another 2610 with T1 ATM IMA module?

2 Replies 2

doug.lockwood
Level 1
Level 1

T-1 IMA cards can be used over point-to-point T-1's, without using an ATM switch. If I understand correctly, the 2600 routers are limited to PVC only. It takes a 3600 series router to run clip or lane. However, PVC's are most approprate over dedicated lines, in any case. I want to look up wheather the 2610 supports the IMA card, however.

If you are interested, I have 2 IMA cards for the 2600/3600 in the IO Lab in Arlington Heights.

Doug

the 2610 does support IMA cards; just took one out of service.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: