12-15-2001 07:00 PM - edited 03-01-2019 07:45 PM
Hi
We have a 3620 router with a fast ethernet card.
the IOS version is 12.0(13)
When we add the ATM OC3 Network Module NM-1A-OC3MM,
our router doesn't recognize it.
The EN Led flashes once and then goes off.
We have tried 2 different cards with 2 different
3620 routers.
The mother board and the PCMCIA controller or compatible with this module.
So we think the hardware is not faulty.
We think our IOS may not be right.
Any suggestion ...
Thanks
Laurence
12-16-2001 11:37 AM
You will need new IOS. Here is the link to the Hardware/Software Compatibility Matrix:
http://www.cisco.com/cgi-bin/front.x/Support/HWSWmatrix/hwswmatrix.cgi
12-17-2001 09:12 AM
You'll need a plus version of IOS
12-17-2001 11:02 AM
Thank you.
Now I need to find the good version.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: